New Panasonic NA1-5-PN Beam Pitch Area and similar items

CE marking directive compliance EMC Directive, RoHS Directive Sensing height 100 mm 3.937 in Sensing range 0.2 to 3 m 0.656 to 9.843 ft (0.05 to 1 m 0.164 to 3.281 ft when set to SHORT) (Note) The sensing range is the possible setting distance between the emitter and the receiver. Beam pitch 25 mm 0.984 in Number of beam channels 5 beam channels Sensing object ø35 mm ø1.378 in or more opaque object (completely beam interrupted object) Supply voltage 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less Power consumption Emitter: 0.6 W or less Receiver: 0.9 W or less (Note) Obtain the current consumption by the following equation. Current consumption = Power consumption / Supply voltage (e.g.) When the supply voltage is 12 V, the current consumption of the emitter is 0.5 W / 12 V ? 0.042 A = 42 mA Output PNP open-collector transistor - Maximum source current: 100 mA - Applied voltage: 30 V DC or less (between output and +V) - Residual voltage: 1 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current) Output:Utilization category DC-12 or DC-13 Output:Output operation ON or OFF when one or more beam channels are interrupted / ON or OFF when two or more beam channels are interrupted, selectable by operation mode switch Output:Short-circuit protection Incorporated Response time 10 ms or less (when the interference prevention is used, in Light state: 30 ms or less, in Dark state: 13 ms or less) Indicators:Emitter Power indicator: Green LED (lights up when the power is ON) Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) Indicators:Receiver Operation indicator: Red LED (lights up when one or more beam channels are interrupted, but lights up when two beam channels or more are interrupted in the double-beaminterruption mode) Stable incident beam indicator: Green LED (lights up when all beam channels are stably received) Job indicator: Orange LED (lights up or blinks when the job indicator input is High, lighting pattern is selected by operation mode switch) Interference prevention function Incorporated Pollution degree 3 (Industrial environment) Protection IP62 (IEC) Ambient temperature -10 to +55 ? +14 to +131 ? (No dew condensation or icing allowed), Storage: -20 to +70 ? -4 to +158 ? Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH Ambient illuminance Incandescent light: 3,000 lx or less at the light-receiving face Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure Insulation resistance 20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure Vibration resistance 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each Shock resistance 490 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each Emitting element Infrared LED (Peak emission wavelength: 950 nm 0.037 mil, synchronized scanning system) Material Enclosure: Heat-resistant ABS Lens cover: Acrylic Indicator cover: Acrylic Cable 0.3 mm2 4-core (emitter: 3-core) oil resistant cabtyre cable, 2 m 6.562 ft long Cable extension Extension up to total 100 m 328.084 ft is possible for both emitter and receiver with 0.3 mm2, or more, cable. Weight Net weight: Emitter 70 g approx., Receiver 80 g approx. Gross weight: 270 g approx.