"Pan Seal Kit"

** Includes: Heavy-Duty Seals, Stainless Steel Flat Washers, Stainless Steel Snap Rings and Push On Fasteners.

** (Style of Push on Fasteners may vary.)

* Most West Bend pans do not use a snap ring on the bottom end of the shaft. Most use a push/press on fastener that is included.

*You will need Snap Ring Pliers to complete the installation.

will fit the models listed below:

West Bend

Automatic Dough & Bread Maker

Model Numbers: 

41080

41080R

41080Z

**There are 3 generations / versions of this pan. The third generation of this pan has snap rings on the 

drive shafts which make it much easier to install the new seal. The other two versions are more challenging

unless you know how to remove the retainers and are able to source new retainers. 

**The pan castings vary by generation and production time.

**All generations have variations.

**Some pan castings require 19mm outer diameter seals and other castings require 20mm outer diameter seals.

**The only way to know which size you need is to measure the outer diameter in millimeters.

**Some of the seals may have the number 19 or 20 printed on it which represents the outer diameter.

* Please remove your old seals before placing and order. The success rate for removing a seal is 50%

*If you do not have the correct tools or equipment to do this repair I highly recommend that you find a professional to remove the old seal and to install the new seal.

**Please confirm the outer diameter needed during checkout.

THANK YOU!

Bread Machine Parts Finder