The connector housing in this listing being WPT-931, is black in color
Is your connector LIGHT GRAY in color? If so Click Here
Is your connector DARK GRAY gray in color? If so Click Here
Shipping is your choice:
Genuine Ford Motorcraft. Arrives fully assembled and ready for installation. Picture showing the connector taken apart is to demonstrate all of the included components as specified by Ford. Cheap aftermarket connectors leave out various components. I have also included a connector diagram from the Ford Service Manual for reference in the pictures section. Also included is a picture to help differentiate between the three versions of coil connectors.
Connector Assembly consists of the following components:
ELECTRICAL SPECIFICATIONS (Cheap Chinese connectors actually allow arcing)
You will want to reuse your factory original wiring and terminals.
1. Simply remove the wire/terminal assemblies from the old connector (feel free to break it apart as you have new ones! Just be careful to not damage your wire/terminals). With a flat blade screwdriver, insert the tip into the slot in the PLR. Pry up. With a straight pin, reach inside the connector housing to push the terminal
2. Do note the position of each wire in relation to the connector.
3. Insert the wire/terminals into the new connector. You should hear an audible click.
4. From the front of the connector, push the white PLR inward to lock the terminals in place.
5. Install connector on coil.
6. Push the red CPA forward to lock the connector in place.
7. Rinse and repeat with each connector.
8. Done.
Applications:
*NOTE: