Genuine Ford Motorcraft. Arrives fully assembled and ready for installation. Picture showing the connector taken apart is to demonstrate all of the included components as specified by Ford. Cheap aftermarket connectors leave out various components. I have also included a connector diagram from the Ford Service Manual for reference.
Includes:
ELECTRICAL SPECIFICATIONS (Cheap Chinese connectors actually allow arcing)
You will want to reuse your factory original wiring and terminals.
1. Simply remove the wire/terminal assemblies from the old connector (feel free to break it apart as you have new ones! Just be careful to not damage your wire/terminals).
2. Do note the position of each wire in relation to the connector.
3. Insert the wire/terminals into the new connector. You should hear an audible click.
4. From the front of the connector, push the white PLR inward to lock the terminals in place.
5. Install connector on coil.
6. Push the red CPA forward to lock the connector in place.
7. Rinse and repeat with each connector.
8. Done.
Applications: