Genuine Ford Motorcraft

Includes:

• Connector Housing (30% glass reinforced. Chinese version: not so much)
• Grommet cap
• Primary lock reinforcement
• CPA(Connector Position Assurance device)
• Matte seal
• Interfacial seal. 

ELECTRICAL SPECIFICATIONS (Cheap Chinese connectors actually allow arcing)

• Voltage: 250V
• Current: 22.0A
• Contact Resistance: 10 milliohms max.
• Dielectric Withstanding Voltage: 500V DC
• Insulation Resistance: 20 Megohms min.

You will want to reuse your factory original wiring and terminals. 

1. Simply remove the wire/terminal assemblies from the old connector (feel free to break it apart as you have new ones! Just be careful to not damage your wire/terminals). 

2. Do note the position of each wire in relation to the connector (truth is, when replacing your coil connector, the coil nor the PCM cares which terminal is positive and which is negative...so don't stress). DO not apply this fact to other sensors/switches. Some sensors/switches are negative triggered and some have internal diodes.  Anywho that's more info than you wanted, so I'll stop there.

3. Insert the wire/terminals into the new connector. 

4. Rinse and repeat with each connector.

5. Done.

Applications:

• FORD EDGE 2007-2017
• FORD EXPLORER 2011-2017
• FORD F-150 2011-2016
• FORD FLEX 2009-2017
• FORD FUSION 2010-2012
• FORD MUSTANG 2011-2017
• FORD POLICE INTERCEPTOR SEDAN 2013-2017
• FORD POLICE INTERCEPTOR UTILITY 2013-2016
• FORD TAURUS 2008-2017
• FORD TAURUS X 2008-2009
• FORD TRANSIT 150, 250 and 350 2015-2017
• LINCOLN CONTINENTAL 2017
• LINCOLN MKS 2009-2016
• LINCOLN MKT 2010-2017
• LINCOLN MKX 2007-2017
• LINCOLN MKZ 2007-2016
• MAZDA 6 2009-2013
• MAZDA CX-9 2007-2015
• MERCURY SABLE 2008-2009