THIS KIT CONTAINS EVERYTHING YOU NEED TO REBUILD THE WATER PUMP FITTED TO 1991 - 2010 JOHNSON EVINRUDE  V4, V6, V8 OUTBOARDS AND OMC SEA DRIVE MODELS 25", 30" SHAFT, AND MODELS WITH "RELIEVED" GEARCASE.
REPLACES OEM # 5001595
 
 MAY ALSO BE USED FOR ANY V4 - V6 MOTOR FROM 1980 TO 2010 WITH FLAT SPOT FOR IMPELLER DRIVE KEY.
85, 88, 90, 100,115, 140 HP CROSSFLOW V4
150, 175, 185, 200, 235 HP CROSSFLOW V6
90, 115, 60 DEGREE, 120 &140 90 DEGREE "LOOPER" MODELS
150 & 175 60 DEGREE "LOOPER MODELS"
200 THRU 300 90 DEGREE V6, V8 "LOOPER" MODELS

YOU GET EVERYTHING PICTURED ABOVE AS WELL AS THE SUPPORT OF THE MASTERTECH.
ANY QUESTIONS YOU MIGHT HAVE REGARDING THIS KIT SEND US A MESSAGE AND WE WILL RESPOND

TIPS: BE SURE TO INSTALL THE O-RING FROM THE KIT ON THE DRIVESHAFT BEFORE INSTALLING THE IMPELLER, AS IT ACTS AS A SEAL TO PREVENT AIR ENTERING THE PUMP THRU THE IMPELLER KEY CUTOUT. YOU CAN ALSO USE IT TO HOLD THE CAM IN PLACE TO EASE ALIGNING IT WHEN YOU PLACE THE IMPELLER ON THE SHAFT.

LIGHTLY LUBRICATE THE IMPELLER, THEN INSTALL THE PUMP CUP OVER THE IMPELLER BY ROTATING THE DRIVESHAFT CLOCKWISE AND PRESSING DOWN ON THE CUP, THEN CAREFULLY INSTALL THE PUMP CASE OVER THE CUP, BEING SURE THAT THE TAB ON THE CUP IS IN THE RECESS IN THE CASE.

SOME WEATHERSTRIP ADHESIVE MAY BE LIGHTLY APPLIED TO HOLD THE PUMP CASE O-RINGS IN PLACE ON THE HOUSING. THE SMALLER ONE FITTED INSIDE SHOULD ONLY BE TACKED IN PLACE, EXCESSIVE ADHESIVE HERE MAY BLOCK THE AIR BLEED PASSAGE IF SO THE PUMP WILL LOSE PRIME AND NOT FUNCTION.

OTHER EVINRUDE JOHNSON MODEL AND YEAR WATER PUMP REBUILD KITS AVAILABLE, INQUIRE.

ALL PARTS CARRY A 1 YEAR MANUFACTURERS WARRANTY


INCLUDES USPS FIRST CLASS SHIPPING IN USA. OUTSIDE THE US? NOT TO WORRY, WE SUBSCRIBE TO THE GLOBAL SHIPPING PROGRAM.

Please Supply Your Motor Model and Serial Numbers at Checkout in the "ADD MESSAGE" section:

 
so we can verify this application fits your motor

DISCLAIMER
The information provided herein is correct to the best of my knowledge, however the MasterTech makes no warranty, express or implied, regarding the use of, results of, or liability created from, application of this data. This information is disseminated in good faith, however MasterTech assumes NO LIABILITY whatsoever in regard to this service. The information, software, products, and services published in this listing may include inaccuracies or typographical errors. Changes are periodically added to the information herein. Mastertech may make improvements to this listing at any time. Parts ordered may or may not be in dealer stock at the time of order. Thank you for reading.