Headlights Assembly for Hyundai Elantra 2014-2016 Halogen fits LED set 2pc LH+RH
Illuminate your path with this pair of Headlight Assemblies designed for a perfect fit on your Hyundai Elantra models from 2014 to 2016. These sets come in a polished finish, offering a sleek and modern look that complements your vehicle's aesthetic. The chrome housing and clear lens ensure that your headlights are not only stylish but also durable. Each assembly is equipped with a halogen lighting technology that provides a warm white light, meeting the standards of SAE certification. The dimensions are precise, with a length of 11 inches, a height of 30 inches, and a width of 8 inches, ensuring a snug fit on both the left and right sides of your vehicle's front. The package includes two pieces, LH+RH, to enhance your visibility and restore your vehicle's functionality.

Specifications



Fitment:

Hyundai

2016 Elantra Value Edition

2014-2016 Elantra (Submodel: GL, GLS, L, Limited, SE, Sport)



Specification:

Superseded Part Number: 921013Y500, HY250218 (Left Headlamp)

OE/OEM Part Number: 92102-3Y500 (Right Headlamp)

Manufacturer Part Number:

921023Y500 (Left Headlamp)

92102-3Y500 (Right Headlamp)

Applicable Models: For 2016 Hyundai Elantra Value Edition, 2014-2016 Hyundai Elantra Sedan (Submodel: GL, GLS, L, Limited, SE, Sport)

Condition: New

Material: PC, PP, ABS

Process: Injection Molding

Lens Color: Clear

Housing Color: Black   

Type: Headlamp

Light Source Type: Halogen

High Beam Light: Yes (Bulb Included)

Low Beam Light: Yes (Bulb Included)

Turn Signal Light: Yes (Bulb Included)

Side Marker Light: Yes (Bulb Included)

LED Daytime Running Light: No

Custom Bundle: No

Bulbs Included: No

Installation Position: Front, Left or Right

Way of Use: Direct Replacement

Assembly Method: Closed

Gross Weight: 3.1kg/6.83lbs

Net Weight: 2.8kg/6.17lbs

Package Size: 75*26.5*20cm/29.53*10.43*7.87in

     


Package Included:

1* Headlight (Driver or Passenger Side)

*If both the left and right lights are needed, please order them separately.



Please Note:

Before you begin to adjust the light, make sure check the alignment of your lights first. Park the vehicle about 10 to 25 feet from the wall with the lights aimed at the wall. The centerlines of the headlights should not be any higher than 3.5 feet above the ground.



Installation:

1. Find the adjustment screws. Firstly, locate the adjustment screws on your vehicle.

2. Adjust the headlights individually. The headlights should be adjusted one at a time. Put a rag or towel over a chair in front of the light you want to block. Covering the light assembly directly can damage the plastic lens.

3. Adjust the vertical field. The screw on the top of the light housing should be turned clockwise to raise the lights and counterclockwise will lower the light. The headlight should be adjusted until the top of the most intense part of the light beam shines directly on or just below the center of the tape line on the wall.

4. Adjust the horizontal field. The screw on the side of the light housing should be turned to get the right/left adjustment correct. Adjust the lens so that the most intense part of the beam is to the right of the vertical line.

5. Test your results.