Dent Puller Welder 110V Spot Welder Dent Puller 7 Welding Mode, Stud Welder Dent Repair Kit with Slide Hammer Dent Puller
Specification
| Item model number | MMT211683-spot-201 |
| Product Dimensions | 12.8 x 8.27 x 8.54 inches |
| Brand | MOTOCOCHE |
| Country of Origin | China |
| Manufacturer Part Number | MMT211683-spot-201 |
| Item Weight | 47.1 pounds |
| Special Features | stud welder dent puller repair |
| Manufacturer | MOTOCOCHE |
| Model | Dent Puller Welder |
| Size | American,110V |
8.27 inches x 12.8 inches x 8.54 inches. Weight: 47.1 lb
Item Description
- [Automatic Welding Mode] The spot welder dent puller can be switched to automatic control technology for automatic control of the current level, resulting in faster and more precise welding tasks.
- [7 Welding Modes] The dent puller weld erequipped with 7 default welding modes to adapt to different welding studs, easy to operate control panel.1,Triangular Meson Pull; 2,Round Gasket Welding; 3,Long Gasket Welding; 4,Wave Line Welding, 5,Stud Welding; 6,Carbon Rod To Close The Fire; 7,Single- Sided Spot Welding. Ideal for car enthusiasts and DIYers looking to tackle dent repairs at home or in their workshops with ease and confidence.
- [10 Power Levels] The spot welder dent puller power output is a key factor in welding and should be adjusted according to the thickness of the material to be welded, enabling you to tackle all common dent problem.
- [Smaller Spot Welds] Stud welder dent repair kit have a thickness of 0.024 to 0.047"/0.6 to 1.2mm on one side of the weld, which is smaller and ensures no damage to the backside metal coatings or painted surfaces, ensuring no damage to the back metal coating or paint surface compared to other dent pullers.
- [Thermal Protection System] The weld dent remover tool is equipped with a heat sink on the side of the machine that will activate at 203°F/95°C to prevent potential short circuits and machine burnout
- [Upgraded Transformer] The current range of the transformer determines the size and tension of the weld joints in the sheet metal repair machine, which affects the quality of the repair and the efficiency of the work. Our spot welder dent puller is designed with a transformer that has low no-load current, low failure rate and high power factor.
- [Packing List] We provide a portable tool kit with all the accessories of this equipment, the accessories include 1x main unit; 1x weld puller; 1x dent puller; 1x manual suction cup; 1x dual-purpose dielectric head; 1x six-jawed hook; 1x wrench; 1x round washer chuck; 1x pulling hook; 1x connector; 1x carbon rod connector; 2x carbon rods; 10 x triangular straight puller tabs; 10 x corrugated wire; 20 x Circular Washers; 20 x OT Spacers; 1x User Manual.
Product Description
VIDEO OF VEHICLE PANEL SPOT PULLER DENT SPOTTER
The video showcases the product in use.The video guides you through product setup.The video compares multiple products.The video shows the product being unpacked.
Other Choices
| Add to Cart | Add to Cart | Add to Cart | Add to Cart | Add to Cart | Add to Cart | |
|---|---|---|---|---|---|---|
| Customer Reviews | 3.9 out of 5 stars 148 | 3.9 out of 5 stars 148 | 3.9 out of 5 stars 148 | 3.9 out of 5 stars 148 | 4.8 out of 5 stars 9 | 4.8 out of 5 stars 9 |
| Price | $326.00$326.00 | $329.00$329.00 | $259.00$259.00 | $225.00$225.00 | $35.99$35.99 | $31.00$31.00 |
| Output Voltage | Y-110V | Y-220V | S-110V | S-220V | — | — |
| Output Current | 20A | 20A | 20A | 20A | — | — |
| Rate Power | 20W | 20W | 20W | 20W | — | — |
| Welding Mode | 7 | 7 | 6 | 6 | — | — |
| Product Weight | 47.1lb | 42.9lb | 53.8lb | 40lb | — | — |
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.