Responsive image

Panavise 400 Heavy Duty Base

Product Details

Product Description Vise Base, Base Type Stationary, Material Aluminum, Swivel Angle 360 Degrees , Overall Length 4-1/8 In., Overall Width 4-3/32 In., Overall Height 3-3/16 In., Features Single knob Controls Head movement through 3-planes: 90 Degrees Tilt, 360 Degrees Turn & 360 Degrees Rotation, Accepts any 1 In. (25.4mm) Diameter Shaft, Compatible with Mfg. No. 437 Heavy Duty Fixturing Head From the Manufacturer The PanaVise 400 heavy duty base is a heavy duty work-holding tool base designed for use with small engines, electrical motors, wood carving and chiseling. The base is compatible with 1" head shafts and utilizes the PanaVise "split-ball" adjustment feature that allows for head movement through three separate planes controlled by a single load control knob. Used with a suitable platform head element, the PanaVise 400 heavy duty base can support up to 75 lbs. at up to a 45-degree angle. Heavy duty base support for industrial repairs. View larger. 1" shaft compatibility provides the safe, reliable support heavy items require. View larger. Supports up to 75 lbs. at up to a 45-degree angle (heavy duty head sold separately). View larger. Heavy Duty Base Support for Weighty Repairs and Uses The PanaVise 400 heavy duty base is 3-1/4" (82.5 mm) tall, weighs 1.5 lbs. (0.7 kg) and has a base diameter of 4-1/8" x 4-1/8" (104.8 mm x 104.8 mm). The base is designed for use with work-holding tool heads with shafts of 1". Permanent mounting of any head shaft is also an option using the pre-drilled 1/4-20 tapped hole located at the bottom of the base and a matching flat head screw. The bottom lip of the base contains four pre-drilled holes countersunk for use with four 5/16" (7.9 mm) flathead screws (sold separately) to secure the base to a work surface. Installed correctly and utilizing a suitable heavy duty base the PanaVise 400 heavy duty base can support a maximum weight/angle ratio of 75 lbs. (34.0 kg) at 45 degrees. Tilt, Turn and Rotate Functionality The 400 heavy duty base utilizes PanaVise single-knob "split-ball" functionality at the point of contact with installed vise heads. Once a head element is installed and an item is secured, the split-ball system allows for maneuvering the item along three separate planes (tilt, turn and rotate). The complete mobility range with the model 400's split-ball system is a 90-degree tilt to the side, along with either an angled rotation or a level turn range of 360 degrees. This range allows a user to rearrange work items into virtually any position, limiting the need to adjust the overall position of the vise, or the item within the vise. Key Features Work-holding tool base designed for heavy items Supports up to 75 lbs. (34.0 kg) at up to a 45-degree angle "Split-ball" feature controls for head movement through three separate planes Single-load control knob locks head firmly in place Compatible with all any head element with 1" diameter shaft (sold separately) Option to permanently mount any head shaft to base with screw Stable mounting to work bench via four flat head screws Specifications Height: 3-1/4" (82.5 mm) Weight: 1.5 lbs. (0.5 kg) Diameter: 4-1/8" x 4-1/8" (104.8 mm x 104.8 mm) Maximum weight/angle limit: 75 lbs. (34.0 kg) at 45 degrees 3-plane adjustability Rotation: 360 degrees Turn: 360 degrees Tilt: 90 degrees Shaft diameter accepted: 1" (25.4 mm) Permanent shaft attachment: Yes 1/4-20 flat head screw (optional) Shaft depth: 1-11/16 (43.2 mm) Bolt circle countersunk for four 5/16" (7.9 mm) flathead screws (sold separately) What's in the Box? PanaVise 400 heavy duty base User's manual and warranty information Limited Lifetime Warranty All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work-holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."

  • Recommended for use with the 437 Heavy Duty Fixturing Head
  • Accepts any 1 (25.4mm) diameter shaft to a depth of 1.7 (43.2mm)
  • Single knob controls head movement through 3-planes: 90 Degree Tilt, 360 Turn & 360 Rotation
  • Square base [4.125 x 4.125 (104.8mm x 104.8mm)] has four 0.3125 (7.9mm) mounting holes (mounting screws not included). Height: 3.25 (82.5mm), Weight: 1.5 lbs. (0.7kg)

Payment

We accept PayPal and credit cards via PayPal.

Taxes - US

We collect sales tax, as required by law.

Shipping

We make every effort of shipping within 3 business day of payment clearing. The estimated delivery time is 2 - 5 business days from the shipping date.

Policies

If you do need to return your item, please contact us via email (you will receive an email when your product ships with additional details - Subject: Important information about your purchase). You will then be provided with a return shipping label and packing slip. Pack the item carefully. Include the packing slip, apply the shipping label, and return the item within 30 business days of the date you request a return, or your return will be canceled. Once we receive your order we will inspect the return. Please allow up to 5 business days of receiving the returned item for your refund.