IntelliChlor™ Electrolytic Cell
Acid Cleaning Kit Part # 520670 For Uses On The IntelliChlor Models IC20 & IC40
The kit includes: One o-ring, one washer, and one cap.
Installing the acid cleaning kit parts:
1. Disconnect the IntelliChlor communication cable from the power center. If the IntelliChlor cell is
connected to an IntelliTouch load center, disconnect the cable from the load center.
2. Remove the IntelliChlor unit from the pool system plumbing. To remove IntelliChlor, first switch off the
system pump and unscrew both unions from the IntelliChlor unit. If the cell cable is attached to the
system pipe, you may need release the cable from the pipe to allow the cell to be placed in the
bucket.
3. Place the o-ring in the washer.
4. Place washer with o-ring in cap.
5. Screw the cap with washer and o-ring onto the threaded end of the IntelliChlor cell.