Dual Voltage 220V/110V, Arc Welder, TIG Welding Machine with Torach Accessories (Tig200Pv)
Specification
| Item model number | Tig200PV |
| Batteries Required? | No |
| Power Source | ac/dc |
| Material Type | Tig200PV |
| Material | Tig200PV |
| Country of Origin | China |
| Item Weight | 30.3 pounds |
| Batteries Included? | No |
| Manufacturer | HANSNOKTECH |
| Package Dimensions | 22 x 17 x 17 inches |
| Included Components | Accessories Included:1 x Remote TiG torch 13.1ft; 1 x Earth clamp 5ft; 1 x MMA electrode holder 5ft; 1 x Gas hose 9.8ft; 2x Hose Clamps |
17.0 inches x 22.0 inches x 17.0 inches. Weight: 30.3 lb
Item Description
- Multi-Process, including STCK/TIG ACDC welding.
- IGBT technology deliver the best durability and the best welding experience.
- Start and end amps MMA hot start force current adjustment. 2t/4t steps
- AC/DC mode options With smart data base,fully adjustable pulse.Pulse function about AC balance function and AC frequency function.
- Accessories Included:1 x Remote TiG torch 13.1ft; 1 x Earth clamp 5ft; 1 x MMA electrode holder 5ft; 1 x Gas hose 9.8ft; 2x Hose Clamps
Product Description
Accessories Included:
1. Remote TiG torch 13.1ft(4m) x 1
2. Earth clamp 4.9ft(1.5m) x 1
3. MMA electrode holder 4.9ft(1.5m)
4. Gas hose 8.2ft(2.5m) meters
5. Collet x3; Ceramic x 3
6. Collet Body x 1
7. US power converter x 1
8. Tungsten x 1
9. Instruction manual x 1
10. Long Back Cap x 1; Short Back Cap x 1
HANSNOKTECH TIG200PV ACDC Welding Machine
The parameters of the Tig200 AC/DC on the front panel can all be adjusted continuously and steplessly via one dial, such as start current, crater arc current, welding current, base current, duty ratio, upslope/downslope time, pre/post-gas, pulse frequency, AC frequency, balance, hot start, arc force and arc length.
- Input voltage: AC110/220V±15% 50/60
- Output Current Range: (1) TIG 110v: 10A-120A/220v: 10A-200A, (2) MMA 110v: 30A-120A/220v: 30A-160A
- Duty cycle: Tig 70%(200A) MMA 40%(160A)
- Protection degree: IP21S
- Net weight: 26.4lb(12KG)
- Start current: 10-200A
- Machine dimension: 6.6x15.7x11.4 In.
Functional Description
1. Welding circulation indicators
- a. On TIG mode, users can choose and set Pre-Flow, Start amps, Up-Slope, Peak, Down-Slope, Crater amps, Post-Flow.
- b. On MMA mode, users can choose Start amps, Peak (welding amps.), Force amps.
2. AC frequency & AC balance Optional List
- a. This function is on Pulse TIG mode.
- b. lt can be switched to AC frequency & AC balance setting.
3. Pulse TIG/TIG/MMA selector
- a. Users can keep a long press over 3 sec to save the current setting.
4. Multifunctional knob
- a. Confirm and Skip to next.
- b. Turn - To adjust parameter settings (Long press over 5 sec. all data would be re-set to factory setting)
5. AC DC mode selection
- a. Please choose AC when welding aluminum.
- b. Long press 5 seconds to activate REMOTE function.
6. 2T/4T/Spot function selector. Tig200PV Have Hot Start & Arc Force Mode
Return Policy
• We guarantee against any defective or misrepresented products. The original shipping label must be sent back to us to validate the return. A full refund can only be issued during the first 30 days upon receipt of the product.
• Returns will be voided if the product is mishandled or physical damaged by customer.
• Buyer will be responsible for all kind of return shipping/shipment to the seller for resolving the problem.
• Returns made for all non-defective, undamaged products are subject to a 15% restocking fee. Shipping and handling fees are absolutely non-refundable. If an item is returned to us due to an address issue, we do charge a reshipping fee to reship. If you would like a refund, there will be a 15% restocking fee applied.
• All returned products need to be assigned an RMA # (Return Merchandise Authorization #) prior to return. Please contact us through's messaging system to obtain an RMA# for the return. Any returned product without an RMA # on package will not be accepted or processed.
• Please contact us before returning.
Feedback
• We appreciate your feedback and our system will automatically leave feedback for you after bid ends.
• Please contact us through message center if you have any problems, we will always try our best for 100% customer satisfaction.