Application:

For Jeep Wrangler JK 2007-2018

NOTE: The torque of the pin is 10-20 Nm, do not over-torque

Specification:

• Condition: 100% Brand New
• Material: Steel
• Lift Height: 2.5-6.0" Lift
• Thread specification: M12*1.75
• Type: Sway Bar Disconnects Kit
• Warranty: 2 Years

Package Includes:

Front Sway Bar Links Disconnects Kit (As Pictures)

Note: You can grind the pin with the sandpaper when the pins do not go in the hole

Features:

• Great Improve Off-Road Performance
• Adjustable Threaded Body to adopt Your Vehicle
• Easy Lubrication with Convenient Grease Fittings Allow
• Front Swaybar Quicker Disconnect System with a 2.5"-6.0" Lift
• Easy to install and High quality.
• Significantly improves suspension travel for enhanced off-road performance.
• Heavy Duty steel construction provides high strength and long life.
• No Extra Parts After Detaching Sway Bar

Q&A:

1. If the pins can't go through the hole, there are two suggested solutions for you.

(1) The OD of lower section of the pin is a little bigger than the upper threaded section. you can take the nut down and insert the pin into the hole from the upper threaded side.

(2) If solution 1 can't solve your problem, you can grind the bigger section with lower-grit number sandpaper. use a piece of sandpaper to wrap the lower section tightly. turn the pin 360 degree and keep turning several times.