1. Keep the back clean before ironing, and adjust the temperature to the suitable clothing temperature according to the use method of the iron. 2. Put the cloth sticker in the right place (don't tear off the glue). Blanch it back and forth for a few times, usually for about 10 seconds. 3. In order to prevent scalding, a thin layer of cotton cloth (must be cotton yo, not faded cloth) can be put on the cloth. After ironing, check the edge to see if it is ironed, and ironed the edge a few times more. 4. Still need root decals thickness to determine the temperature, thicker, must be higher temperature, hot longer. For extra thick cloth stickers, it can be ironed a few times on the back. 5. Pay special attention to: For cloth stickers with sequins or brighter surfaces (because the sequins are plastic products), it is necessary to lay a layer of cloth and iron it at low temperature (below 130 C), or use steam iron directly. Or put a wet cloth on it. In order to avoid the melting of plastic sheets caused by excessive temperature; 6. The best way is to sew a few stitches on the edge of the cloth with needles and thread after ironing, so that it is more firm and very well-dressed. 7. If there is no iron at home, the cloth can be sewn on the clothes directly with the same color thread.
NOTE:1. Due to the light and screen difference, the item's color may be slightly different from the pictures. 2. Please allow 0.5-2 cm differences due to manual measurement.
IF YOU HAVE ANY QUESTIONS,PLEASE CONTACT US,WE WILL REPLY YOU AS SOON AS POSSIBLE,THANK YOU FOR YOUR UNDERSTANDING!