Specification
6602-001655 Dryer Tension Belt and DC93-00634A Dryer Idler Pulley Replacement include: 1 x 6602-001655 Idler Belt and 1 x DC93-00634A Idler (include 1pc screw)

6602-001655 Belt approx. 92’’Length X 0.3’’Width,replace AP4373659, 6602-001314, 1935594, 6602-001314, EAP4133825, PS4133825 etc

6602-001655 drum belt attaches to the motor pulley and causes the drum to spin as the motor is rotating. The drum belt is made of black rubber. This is an easy repair and should only take a few minutes. This goes between the drive motor and the dryer drum. The belt may have broken, which will cause the drum to not turn properly. You will need to pull your dryer away from the wall and use your Phillips screwdriver to remove the screws on the back.

This part works with the following brands: Samsung, Kenmore
This part works with the following products: Dryer
This part fixes the following symptoms: Will not tumble | Will Not Start | Noisy

DC93-00634A Idler approx. 6’’Length X 4’’Width, replace AP4373659, 6602-001314, 1935594, 6602-001314, EAP4133825, PS4133825 etc

DC93-00634A Dryer Idler Pulley includes the idler arm and the idler pulley that maintains tension on the drive belt, allowing the belt to turn. Disconnect the power before installing this part. Wear work gloves to protect your hands.

This part works with the following brands: Samsung, Kenmore
This part fixes the following symptoms: Will not tumble | Will Not Start | Noisy