E6000 Glue DIY Crystal Rhinestones Craft Tool Needles Epoxy Adhesive Strong Hotfix for Jewelry Tool Jewelry Clothes Crafts Glue
er
Product Description:
E6000 self-leveling adhesive is suitable for toys, rhinestones, various decorations, flowers, lighting, accessories, LCD frames, mobile phone accessories, etc. Crystal crafts, handmade calligraphy and painting stickers, finished earphone earplug accessories, etc., can be bonded to special products and other difficult-to-connect items. E6000 has a slight pungent smell and a faint fragrance; it belongs to a new type of single-component transparent solution glue , Can be cured at room temperature, easy to operate without repacking, can be used after opening the cover, with high elasticity, soft film, anti-vibration and waterproof after curing.
E6000 adhesive can paste more materials, it is suitable for metal, glass, ceramics, stone, bamboo wood, cloth, leather, PVC, ABS, nylon, sponge, film, fabric, electronic components, plastic, rubber, fiber, Paper, mobile phone frame, LCD screen, middle frame, and other materials have good pasting performance.
Instructions for attaching the LCD screen and the middle frame of the frame: put some in the seam where the mobile phone is raised, the bracket or the frame. Press it tightly, it will dry in about a few minutes, and the excess can be wiped off with alcohol. Very easy to use and works great.
Product Features: Colorless, odorless, non-whitening, rubbing with alcohol gently can perfectly remove excess glue. If it is not installed well for the first time, you can easily remove it with a drop of alcohol, and try it again.
Special instructions for attaching the middle frame and frame bracket of the LCD screen and mobile phone screen: Please make a small part to do the experiment before use, so that the correct grip method has been used, and the curing effect will be accelerated by heating with a hair dryer or a heat gun.
【Technical data】
Solid content: 35%-39%
Hardness after curing: 70-85T
Surface drying time: about 2 minutes to 5 minutes for positioning
Full curing time: 24-48 hours
Storage: Store at 10°C to 28°C
Net content: 110ML 50ML 25ML 15ML
【Instructions】
1. Please read the product description carefully before use.
2. Before using it in a large area, please do a small area experiment first.
3. Please ensure that the surface of the adherend is clean and dry.
4. The operating temperature should be between 18-32 degrees.
5. The product can be directly and evenly coated on the surface of the adherend as needed after opening the cover.
6. Wait for 3-5 minutes, and align the two adherends with a little pressure.
7. Just put it straight for several hours, and reach the paste strength after 48 hours.
8. When the product is not in use, close the bottle cap to prevent the glue from curing after contacting the air.Product Description:
E6000 self-leveling adhesive is suitable for toys, rhinestones, various decorations, flowers, lighting, accessories, LCD frames, mobile phone accessories, etc. Crystal crafts, handmade calligraphy and painting stickers, finished earphone earplug accessories, etc., can be bonded to special products and other difficult-to-connect items. E6000 has a slight pungent smell and a faint fragrance; it belongs to a new type of single-component transparent solution glue , Can be cured at room temperature, easy to operate without repacking, can be used after opening the cover, with high elasticity, soft film, anti-vibration and waterproof after curing.
E6000 adhesive can paste more materials, it is suitable for metal, glass, ceramics, stone, bamboo wood, cloth, leather, PVC, ABS, nylon, sponge, film, fabric, electronic components, plastic, rubber, fiber, Paper, mobile phone frame, LCD screen, middle frame, and other materials have good pasting performance.
Instructions for attaching the LCD screen and the middle frame of the frame: put some in the seam where the mobile phone is raised, the bracket or the frame. Press it tightly, it will dry in about a few minutes, and the excess can be wiped off with alcohol. Very easy to use and works great.
Product Features: Colorless, odorless, non-whitening, rubbing with alcohol gently can perfectly remove excess glue. If it is not installed well for the first time, you can easily remove it with a drop of alcohol, and try it again.
Special instructions for attaching the middle frame and frame bracket of the LCD screen and mobile phone screen: Please make a small part to do the experiment before use, so that the correct grip method has been used, and the curing effect will be accelerated by heating with a hair dryer or a heat gun.
【Technical data】
Solid content: 35%-39%
Hardness after curing: 70-85T
Surface drying time: about 2 minutes to 5 minutes for positioning
Full curing time: 24-48 hours
Storage: Store at 10°C to 28°C
Net content: 110ML 50ML 25ML 15ML
【Instructions】
1. Please read the product description carefully before use.
2. Before using it in a large area, please do a small area experiment first.
3. Please ensure that the surface of the adherend is clean and dry.
4. The operating temperature should be between 18-32 degrees.
5. The product can be directly and evenly coated on the surface of the adherend as needed after opening the cover.
6. Wait for 3-5 minutes, and align the two adherends with a little pressure.
7. Just put it straight for several hours, and reach the paste strength after 48 hours.
8. When the product is not in use, close the bottle cap to prevent the glue from curing after contacting the air.