You Are Buying
Aftermarket Premium High Quality
Electrical Connector (Pigtail Wire Harness)
For Oil Pressure Sender / Switch Sensor
================================
PART#
PS371 SMP
=======
Compatible with the following part numbers
PS371 SMP
PS291 WELL
15626428
15955709
======
Specifications:
Connector Gender |
Male |
Connector Quantity |
1 |
Contents |
Pigtail Assembly |
Terminal Gender |
Female |
Terminal Quantity |
4 |
Terminal Type |
4 Blade Terminals |
Wire Quantity |
4 |
================
Fits:
CHEVROLET |
B7 |
1993-1998 |
CHEVROLET |
C5500 KODIAK |
1990-1991 |
CHEVROLET |
C60 KODIAK |
1990-1996 |
CHEVROLET |
C6500 KODIAK |
1997-1998 |
CHEVROLET |
C70 KODIAK |
1990-1996 |
CHEVROLET |
C7500 KODIAK |
1997-1998 |
CHEVROLET |
P6000 |
1992-1996 |
CHEVROLET |
T6500 |
1997-1998 |
GMC |
B7 |
1993-1997 |
GMC |
C5000 TOPKICK |
1990-1991 |
GMC |
C6000 TOPKICK |
1990-1996 |
GMC |
C6500 TOPKICK |
1997-1998 |
GMC |
C7000 TOPKICK |
1990-1996 |
GMC |
C7500 TOPKICK |
1997-1998 |
GMC |
P6500 |
1992-1996 |
GMC |
T6500 |
1997-1998 |
GMC |
T7500 |
1997-1998 |
===========================================
For What
Oil Pressure Switch
What It Does: The Oil Pressure Switch reports the engine operating oil pressure either to
the dash board light or gauge, and it may also report to the engines computer system for
proper control of the engines other operating systems. The oil pressure switch may also
contain a switch for the fuel pump electrical system. If the engine oil pressure should
become too low during a period of operation, the switch will turn the fuel pump off to
prevent extensive damage to the engines mechanical components.
Location: The oil pressure switch will be located on the motor threaded into the engine
block. Part location can be in many locations around the motor block, contact technical
services for part location on your specific application.
Failure Symptoms: Oil pressure light illumination, no start condition no fuel pump
operation as the result of low oil pressure, no start condition no fuel pump operation as
the result of a failed oil pressure switch, oil leak from the electrical connector or switch
crimp area.
Also Known As: Oil pressure sensor, oil sender, oil pressure sender, oil sensor, OPS