DELAY OFF TIMER SWITCH TIME RELAY 25 SEC TO 31 HOURS KIT 12V / 10A DELAY STOP
Choice the default range that you want from drop-down menu
You will able to change it later with soldering iron if need.
Item Description
Delay stop time relay from 25s to 31h and 17m that can be set by using ranges at the table.
Dimensions:
- length - 50 mm
- width 37 mm
- height 20 mm
Have terminals for:
- 12V input , Have protection against reverse supply voltage.
- Normally open contact
- Normally closed contact
- Common terminal
Power supply - 12V DC
Relay: 10A 250V AC
15А/125V DC
15A/24V DC
Time is adjusted by trimmer
Have red diode for indicating number of counting cycles
green diode
- when flashing - for indicating delay progress and closed relay
- when lights - for indicating open relay
Principe of work:
When power is on, the delay time start. The green led diode flashing and relay is activating - output NO contact is closed, NC contact open. When set time end, the relay will deactivating - green diode lights and NO contact is open, NC contact is closed, even the power supply is still applied.
By restart power supply - cycle repeat.
Device don't have plastic box, as see on the picture.
The delay ranges are changed with make a track between terminals bottom of the plate, with numbers from 1 to 10
regarding setup table. The timer will come with default delay range as you can choice from drop-down menu.
When you set delay range - then time is adjusted by trimmer.
Using "Trial and Error" to set a long time period would be very tedious. A better solution is to use the Setup tables provided - and calculate the time required to light the red diode.
For example, if you want a period of 9 Hours - the Range table shows that you can use range number 9. You need relay to be activate for 9 x 60 x 60 = 32 400 seconds. The Setup table tells you to divide this by 512 - giving about 63 seconds. Adjust the trimmer so that the Red LED lights 63 seconds after power is applied. This will deactivate the relay at Range 9 after about 9 Hours.
Package contents:
1. Time Relay
2. Instruction for use and wiring diagram.
|