How to use?
1. Turn the switch on when you use it. Turn it off when not in use.
2. Thermostat, is to adjust the temperature of the pen, the normal adjustment of the temperature in the light gray area, the red zone is high temperature, please try not to transfer to high temperature, This can easily shorten the service life, and May cause the burnout of other components.
3. Within the heat baked pen thermostat, do not make the writing temperature too high, it is easy to burn the written tip.
4. Remove the debris in time, it is normal if there is some black debris on the tip just moisten the sponge and use the wet sponge to remove it.
Specification:
Material: Aluminum Alloy + insulation plug
Power: 60W
Voltage: AC 110V
Warming Tips:
1. In the inlaid pen, tighten the tip of the screw to be loose, and then the tip of the two legs into the copper hole inside the 8 mm, and then use the screws firmly
2. Select the heating wire to select the following 0.8 mm for the writing wire electric wire, do not select the wire, please note that security.
3. Keep the pen away from flammable materials to avoid fire.