This is a Portable Program Transfer Device that transfers CNC machine programs from a standard USB flash drive (Thumb Drive, Pen Drive, memory stick…) to or from the CNC control through the RS232 communications port, also referred to as Drip feed DNC or Up-Loading & Down-Loading. Extension of file name supports: *.?NC, *.TXT,*.NC, *tap

Design characteristics & Features

• LCD 2.4 inch, 65536 colors : display program content, File & Folder list, vibrant and visualization
• Internal MEMORY 2Gb/4Gb/8Gb use to storge and manage NC programs
• 02 ports of USB 2.0
• Protocol RS232 & Parallel 50-pin
• Power switch ON/OFF
• 04 magnet nuts to mounting on CNC machine
• 06 buttons: RESET, FUNCTION, BACK, SET, UP, DOWN
• Function COPY-PASTE, CUT-PASTE, RENAME, DELETE, NEW FOLDER: use to easy management files & folders on USB and MEMORY.
• Function AUTO CUTTING: it can cutting by Percent or Line Number. We can see program content after cutting.
• Function SEND – Send program to CNC machine, monitoring program contant when sending
• Function FORCED SEND – Forced transfer a program to CNC machines without the required signal from CNC machines (Skip XON)
• Function RECEIVE – Receive program / parameter from CNC machine.
• USB/MEMORY capacity monitoring; Format drive, etc.
• PACKAGE INCLUDES 1DNC + 1 CABLE + 1 ADAPTER