AudioControl ACX-300.4
4-channel powersports/marine amplifier — 50 watts RMS x 4
Waterproof power
One of the main issues with powersports amplifiers used to be that the amp wouldn't survive a thorough washing of your vehicle after a good day of dirty fun. AudioControl's ACX-300.4 four-channel amplifier carries an IPX6 waterproof rating, which means you can clean it off with a powerful water jet spray and it won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections.
Play your music loud and clear
The ACX-300.4 can send out 50 watts RMS per channel — plenty enough to hear your music clearly over the sounds of wind and motor. Like it loud? This amp can also operate in two-channel mode to power a pair of high-performance speakers with 150 watts RMS each.
Some practical features
This tiny, hand-size amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system. To simplify setup, a "Maximized" LEDs indicate when you've set the amplifier's gains for optimum performance.
Product highlights:
4-channel powersports/marine amplifier
50 watts RMS x 4 at 4 ohms
75 watts RMS x 4 at 2 ohms
150 watts RMS x 2 bridged at 4 ohms
Class D amp technology
selectable high-pass filter (bypass, 80, 120 Hz at 12 dB/octave) on front and rear channels
More Info:
IPX6 rated chassis will withstand power washing
waterproof input, output, and power connections
preamp and speaker-level inputs
GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input
wiring and hardware not included with amplifier
8-gauge power and ground leads recommended
dimensions: 10-3/4"W x 2-7/16"H x 3-7/8"D
warranty: 5 years
What's in the box:
AudioControl ACX-300.4 owner's manual
4-Channel amplifier (attached 12" power/ground/input/output harnesses)
7" Power & ground harness (10 ga.)
Two 7" speaker output harnesses
Power & ground harness (empty)
2 Crimp-on terminals for power & ground harness
Harness locking pin
2 Rubber grommets
Four 3/4" screws
Quickstart guide