AudioControl ACX-600.1

Mono powersports/marine amplifier — 600 watts RMS x 1 at 2 ohms

Bass power survival

What's the point in installing an amp on your ATV if the amp won't survive when you spray off your vehicle after a day of fun in the dirt and mud? AudioControl's ACX-600.1 mono subwoofer amplifier carries an IPX6 waterproof rating, which means a powerful water jet spray won't hurt a thing. Construction details include conformal circuit board coatings, insulated gaskets for the control panel cover, and waterproof input, output, and power connections.

Play your bass loud and clear

The ACX-600.1 can send up to 600 watts RMS to your sub — plenty enough to feel  the bass pound clearly over the sounds of wind and motor. AudioControl's AccuBASS® processing plus low-pass and subsonic filters help you achieve the best bass tone possible for your subwoofer. This compact amp will fit almost anywhere in almost any kind of vehicle, and it features high-level inputs with signal-sensing turn-on, so it'll work with almost any stereo system.

Some practical features

To simplify setup, a "Maximized" LED indicates when you've set the amplifier's gain for optimum performance. An optional wired remote lets you control the bass volume from the driver's seat.

Product highlights:

mono powersports/marine amplifier

350 watts RMS x 1 at 4 ohms

600 watts RMS x 1 at 2 ohms

full-range Class D amp technology

frequency response: 26-20,000 Hz

selectable low-pass filter (80 or 120 Hz, 12 dB/octave)

AccuBASS® processing improves bass performance

optional ACR-1 wired remote available

More Info:

IPX6 rated chassis will withstand power washing

fully sealed input, output, and power connections

preamp and speaker-level inputs

speaker-level inputs handle up to 12v Rms (about 36 watts)

GTO™ (Great Turn On) signal-sensing turn-on with speaker-level input

wiring, fuse, and hardware not included with amplifier

4-gauge power and ground leads and a 60A fuse recommended

dimensions: 10-1/8"W x 2-7/16"H x 5-3/8"D

warranty: 5 years

What's in the box:

Mono amplifier (attached 12" power/ground/input/output harnesses)

7" Power & ground harness

7" Speaker output harness

16.5' ACR-1 Remote Level Control cable w/ an RJ-14 plug on one end and a male 3.5mm plug on other end (ACR-1 Remote Level Control not included)

Power & ground connector (empty)

2 Crimp-on terminals for power & ground harness

Harness locking pin

2 Rubber grommets

Four 3/4" screws

Quickstart guide