Plesae note:this item was used/old,but it still look good,and working stable,the function same too,it only support 3.53 version(the list photos are 3.53), maybe not support 3.52 version software,model C3-100 and ACP-100 are same,I will test it working good before send,when you bid the item I think you agreed this,thanks for kind understand.

Now this item maybe not support 5.0XXX and 3.52 version software or can't use web logoin/control,it only support V3.53 version software.

Only have English Manual.and the DC3V battery CR2032 is not included,because post office can't it,it easy to buy.

This MainBoard Support 125KHz EM4100 Reader,125KHz HID Reader,13.56 IC Reader.

This item is world time zone model,it is better and can use in the world,but the factory price higher much.some of time zone can't change,the price will cheap.

Hi,if you want to buy a power supply +metal case(box) please search item id:261258299540,thank you.

Dear buyer, Welcome to my shop, if you have any question please let me know, I will do my best to help you when received your mail(will reply within 48hours), thanks for your understand,if want many quantity or many items total please contact me,maybe will have a good price,Have a nice day!

Introduction:

ZK Access Systems are built on flexible, open technology to provide management, real-time monitoring , and control of your access control systemall from a software, Our secure software infrastructure and centralized online administration reduce your IT costs and allow you to easily manage all of your access points in a single location. C3-100s versatile design features take care of present and future needs with ease and efficiency. It is one of the most rugged and reliable controllers on the market, with a multitude of built-in features. The C3-100 can communicate at 38.4 Kbps via RS-485 configuration or Ethernet TCP/IP networks. It can store up to 30,000 cardholders. 

Features:

Multiple hardware protection measure
There are over-current protection, over-voltage protection, reversal protection for the power supply and all the input and output terminal.
Integration with Other Security Systems
C3-100 can be integrated with other security systems such as CCTV, fire alarm, BAS(building automation system) and other systems to configure total security system.
Supports different wiegand reader
The controller support different wiegand format, and can connect to different reader, including ID card reader and Mifare card reader
Input/Output Ports to Control Doors
Connect with variety of sensors, alarms, exit buttons, electric lock and other devices.
Variety of Communication Function
Using either serial or TCP/IP communication, this item only included and recommend ZKAccess 3.5 software.
 Normal open after first punch card can be setup
Real-time Monitoring of Door status
Using the management software, it allows real-time monitoring and control of door opening and closing of the whole system.
Simple Access Control System Configuration
Interlock function
Link different doors with special logic that one door is Open, others should be closed.
Multi-card operation
This function is used to manage visitors or to manage some special high secure place. The doors are opened when appointed number registered cards are read together.
Anti-Passback
Duress Mode

Specifications:

Model C3-100

CPU 32bit MIPS CPU

RAM 32M bits

Flash Memory 256M bits

Number of door controller: 1 door(single door)

Number of readers supported: 2

Number of inputs: 2(1- exit device and 1-door status)

Number of output:2(1-Form C reply for lock and 1-Form C reply for Aux output)

User 30,000

Event Buffer 100,000

Power / Current DC 9.6V-14.4V, Rated Max.1A

Reader Port 2ea (26bit Wiegand, 8bit Burst for PIN)

Communication RS485, TCP/IP

Baud Rate 38,400bps (Recommended) / 9600bps, 19,200bps, 57,600bps (selectable)

Input Port 2ea (Exit Button#1, Door Sensor#1)

Output Port1ea (1 FORM-C Relay Output, SPDT 5A@36VDC/8A@30VAC) 1ea (1 Aux FORM-C Relay Output, SPDT 2A@30VDC)

LED Indicator Yes, LED indication for communication, power, status and punch card

Operating Temperature 0°to +55°C

Operating Humidity 10% to 80% relative humidity non-condensing

Dimension (L*W)mm 160(W)*106(H)(single board ) 

Certification CE, FCC

Include:

1 x USED Single door board controller Only(power supply,lock,reader not include)

1 x English Manual CD with ZKAccess 3.53 version software CD


Shipping:

Payment  

Refunds & Returns