- Use this 1/2-in elbow fitting to run 1/2-in poly in and around tight corners
- Ergonomically designed to make installation easier and to create a secure fit based on your hand strength
- Typically used where the 1/2-in poly tubing needs to run in a 90 shape in corners of the landscape or garden
- To attach the 1/2-in poly tubing first push the collar back to expose the barb with a built in O-ring
- Push and wiggle the 1/2-in poly onto the fitting and under the collar until snug
- While holding the tubing with 1 hand turn the ears of the collar in a left counter-clockwise motion to tightened and lock onto the 1/2-in poly tubing
- Repeat these steps for both sides of this elbow fitting
- This fitting can be uninstalled easily by unthreading the collar in a clockwise motion then by pulling off the 1/2-in poly
- This fitting works with 1/2-in poly tubing that has an inside dimension of 0.600-in ID and an outside dimensions of 0.700-in OD and this fitting is proudly made in the USA
Package Quantity: 1
Type: Drip irrigation elbow
Fits Tube Size: 1/2-in
Material: Polypropylene
Fitting Type: Barb-locking collar
Thread Type: N/A
Color/Finish Family: Black
Maximum PSI: 50
Size - Length: N/A