Item description for Wireless Anemometer with Wind Speed Direction Sensor Temperature Humidity Meter

Specification:

Indoor/outdoor temperature display. Display units options:ºF / ºC(user setting).
Indoor temperature range: 32°F to 122°F (0°C to 50°C);
Outdoor Temperature range:
Alkaline batteries: -4°F to 140°F (-20°C to 60°C)
Lithium batteries: -40°F to 140°F (-40°C to 60°C);
Resolution (for both indoor/outdoor temperature): ±2°F/±1ºC
Temperature accuracy: ±2°F/±1ºC
Humidity range: 20% to 90%
Humidity accuracy:±5%
Receiver: Alkaline battery: 2 AAA 1.5V
Wind Gauge Remote Sensor: Alkaline battery: 2 AA 1.5V or AA lithium battery(Not Included)
Battery life: 12 months (Approx.)
Station dimension: 20.5” height x 9” diameter
Receiver dimensions: 4.9” height x 2.7” width x
Display dimension: 2.36” height x 1.77” width
Perpetual Calendar:
The hour display format can be set between 12
hour format or 24 hour format.
The time zone can be set from-12 to +12(user setting).
Daylight saving time is adjusted automatically (The daylight saving time is adjusted on the basis of different time zone).
The date display format can be set as: YYYY-MM-DD, MM-DD- YYYY,DD-MM-YYYY (user setting).
Wireless 433 MHZ receiving. Available distance: 328 ft in open field.
While receiving RF, press any key to quit.
Indoor/outdoor relative humidity (RH %) display. Display range: 20% to 99%. Resolution: 5%.
Wind-chill temperature display. Display units options: ºF / ºC (user setting).
Dew-point temperature display. Display units options: ºF / ºC (user setting).
Wind speed and wind direction display. Average wind speed and gusts display. The units can be set as m/s,km/h,mph,knots or bft (user setting). Wind speed range: 0 to 50 m/s; Wind direction range:E,S,W,N,SE,NE,SW,NW.
All maximum/minimum data can be recorded and displayed. In addition, the time of recorded data can be displayed as well.
The weather alarm can be set separately, any value can be set. The alarm signal lasts 2 minutes.

Troubleshooting:

If the Receiver does not receive a transmission from a remote unit
channel for 10 minutes, the wind speed, outdoor temperature and humidity will show dashes. To correct this problem:
1. Go to the remote location of that channel to check that the unit is properly positioned, within the appropriate transmission range.
2. If new batteries are faulty on the initial installation, install fresh batteries. If you did not notice the Low Battery icon warning and
the product performed correctly after initial set up, the batteries have lost their charge. Replace the batteries.
3. Check to make sure the transmission path is clear of obstacles and interference.

!!! Please contact us if you require a larger quantity we will reply in 24 hours. !!!

Shipping

1.If you need to buy in bulk, please contact, we will reply in 24 hours.

2.We are always working hard to ensure your package arrives as soon as possible. Please understand that some factors like weather, high postal traffic, and the performance of shipping companies are outside of our control.

3.Usually product Reaches after about 12-45 business days depending on destination. If you have not received your shipment within 45 days from payment, please contact us. We will track the shipment and get back to you as soon as possible with a reply. Refund or resend product will be offered if item still not received.

4.We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We ask you contact us immediately BEFORE you give us neutral or negative feedback, so that we can satisfactorily address your concerns. It is impossible to address issues if we do not know about them!

THANK YOU :)