|
WM180V Precision Metal Bench Lathe 600W 7"*12" |
 |
| Product Overview |
| Miniature lathe is mainly used for processing the end face of various rotary surfaces and rotating bodies.For example, turning inside and outside cylindrical surface, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread, cone surface, ring groove and forming turning surface, turning end face and all kinds of commonly used metric thread. |
| Product Parameters |
| Model: | WM180V |
| Motor: | 110V brushless motor |
| Voltage: | AC110V 50/60Hz |
| Power: | 600W |
| Length of center: | 11.8"(300mm) |
| Swing Over Bed: | 7"(180mm) |
| Spindle bore: | 0.83"(21mm) |
| Diameter of chuck: | 3.94"(100mm) |
| Width of lathe bed: | 3.94"(100mm) |
| Number of Spindle Speeds: | Infinitely variable speeds |
| Spindle taper: | MT3 |
| Knife rest labour: | Horizontal four-station |
| Spindle rotation speed: | 50-2500rpm |
| Range of metric threads: | 0.3-3mm |
| Range of Inch Threads(optional accessory ): | 10-44T.P.I |
| Precision of the spindle: | 0.01mm |
| Range of Longitudinal Feeds: | 0.08mm-0.16mm |
| Automatic feed range: | 0.1mm-0.2mm |
| Towing trip: | 1.97"(50mm) |
| Cross Slide Travel: | 2.95"(75mm) |
| Tailstock Quill Travel: | 2.36"(60mm) |
| Tail frame taper: | MT2 |
| Package size: | 32.1"*19.3"*17.3"(81.5*49*44cm) |
| Gross weight: | 140lb(63.5kg) |
| Product Features & Advantages |
 |
 |
 |
 |
 |
| - High quality cast iron bed after high
frequency quenching process and precision grinding - Metric and inch threads can be machined by replacing metal gears；The spindle rotation speed is divided into two levels in the range of 50-2500rpm, which can be adjusted continuously - Using pure copper core brushless motor, strong power, long life. - 0.83" large spindle through hole, provides more processing possibilities; The gear is made of metal, which is more wear-resistant and has low noise. - With one button start and stop switch and forward and reverse switch |
| Product Presentation & Details |
 |
 |
 |
 |
 |
 |
|
 |
| Item Included(028062) |
| WM180V lathe *1 | Chuck Jaw *3 | Gear *7(30/48/50/52/60/66/70) |
| The Screwdriver *2 | Open spanner *2 | Hexagon Wrench *5 |
| Oil can *1 | The Fuse *1 | Chuck Spanner *1 |
| English manual *1 |
|
You can
make order with no worriy. |