Unique item you will only find here in our store.
LOT of 10 pcs of angle aluminum that works great for custom mounting or working on PC boards. PC BOARD IS NOT INCLUDED
MANY Uses:
- screw one on your service desk to drop in your PC boards vertical to work on, solder etc.
- screw one by each end of PC board into your project box, housing, panel, equipment rack side, etc, to hold your board inside securely.
- stack two or more together on each side to raise it up higher. They interlock, just add a dab of glue to secure.
- secure one set to something and use an inner set on the PC board to make a slide out drawer type board system.
- use for other projects where you need a piece of aluminum angle.
- cut down to smaller size easily with hacksaw or band saw.
- Interlock two in U shape and add a dab of glue for a wall shelf for tiny items, plate holder, frame holder etc
- fit 4 together to make a strong 4 sided square tube, custom frame etc, add a dab of glue to secure
- Buy a set, Send us a picture of your completed project and we will give you 10% off additional purchase
EACH PIECE IS 9" LONG 228mm (22.8CM)
WIDE SIDE IS APROX 20mm
NARROW SIDE IS APPROX 13mm
DIAMETER OF HOLES 2.94MM
Gap the PC board can slide into is up to 7mm
Width of gap (max width of PC board) is about 1.6mm
NOTE: Because they are aluminum (conductive) you will need to be sure your PC board does not have active traces within 7mm on edge / enough free space to fit the groove. Of course you do not have to insert it the full 7mm intot he gap, but would then need to secure it from sliding in. If your outer trace is a ground and it is OK for the rail to be grounded that will work OK too. For low voltage applications, you may also be able to fit in a thin insulating tape to isolate an edge trace from the rail
These are new surplus, but are repurposed from a larger assembly, so some may have scratches from the disassembly process. If it matters, ask first and we can pick out non scratched or least scratched ones. Most have a few small bits of plastic in groove that simply pop out with a paper clip or small screwdriver
PC boards not included (shown for sample illustration)
Select QTY you need and save when you buy more! If shipping calculator does not reduce rate, click on shipping options or ask for custom quote on large orders.
QTY 1= 10 pieces
QTY 2= 20 pieces
QTY 3= 30 pieces